Detroit Speed and Engineering's power steering pumps are compatible with any power steering gear or rack and pinion. All pumps are completely new and are not remanufactured. DSE pumps deliver constant flow under given operating pressures. The transverse bearing compact pumps (TC pumps) are less sensitive to radial belt loading than other types of pumps.


Detroit Speed and Engineering power steering pump specifications:

• Flow = 3.0-3.4 gallons per minute
at 1500 rpm

• Pressure relief = 1250-1450 psi
• TC pumps offer high efficiency and quite operation
• All DSE pumps are completely compatible with Vintage Air's Front Runner accessory drive system
• Feature a 0.662" shaft diameter
• All pumps, including those with an integral reservoir, fit within the Front Runner confines
• All pumps are available with Mustang II flow control valve. This flow control fitting will restrict the flow to approximately 2 gal/min while retaining the appropriate pressure in the system

This new power steering pump is a great value for all applications. The cast iron housing is electroplated for corrosion protection and offers all the performance benefits of the other pumps. The compact black plastic reservoir is race tested and proven in harsh environments.

Tech Tip: Pulleys must be installed with proper power steering pulley installation tool; KD Tool #2897. Do not use a hydraulic press!

Note: You will need to add a pressure fitting at
your GM Type II pump to complete this hose kit. You can choose from 091702 hardline pressure tube, 090401 outlet fitting, or 091801 banjo pressure fitting.